PRO 60

  • 5-Year Armor Protection
  • Layerable, Hybrid Polymer Coating
  • Diamond Hard Scratch Resistance
  • Mirror-Like Gloss and Finish
  • Extreme Hydrophobic Top Coat
Shipping calculated at checkout.
APPLICATION INSTRUCTIONS

PRECAUTIONS

  • Apply in temperatures between 10-30ยฐC, 50-90ยฐF.
  • Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
  • Wear protective gloves.
  • Use fresh applicators & microfiber towels for application of additional layers (do not use previously used towels).

WHAT YOUโ€™LL NEED

  • 3 Microfiber Towels
  • 2 Applicators
  • Protective Gloves
  • Diamond Body Prep

APPLICATION TIPS

  • If applying in high heat or high humidity, lower time between application and removal. Test over a small area to determine appropriate time to let the coating bond to the surface.
  • Apply PRO 60 to body, headlights, rubber, and metal trim.
  • Apply PRO HYDRO to body, headlights, and metal trim, but not to rubber/plastic.
  • PRO 60/PRO HYDRO: As the coating bonds to the surface a haze will appear. This indicates the coating is ready to remove. If product dries on the surface or is difficult to remove, re-wet the area with more product and immediately buff off.

IR CURING LAMP INSTRUCTIONS:

  • Temperature: 50-60ยฐC / 120-140ยฐF
  • Distance to bodywork: 60-70 cm / 24-28 inches.
  • Time: 15-20 minutes for each section.

INSTRUCTIONS

  • Wash, polish and treat areas to be coated with Diamond Body Prep.
  • Shake PRO 60 well for 15 seconds. Place 15 drops on an applicator and apply to 1-2 sections of the car in a crosshatch fashion. Wait 1-3 mins watching for a haze to appear, then gently buff the treated areas and buff off excess with a low-nap microfiber towel.
  • Wait one hour and then apply a second coat repeating the process.
  • Wait one hour and apply a coat of PRO HYDRO that will give the coating system its amazing hydrophobicity. If curing with IR lamps, do so prior to applying PRO HYDRO.
  • Shake PRO HYDRO well for 15 seconds and then apply 15 drops on an applicator. Apply on 3-4 sections of the car in a crosshatch fashion.
  • Wait up to 7-10 mins and buff off excess with a low-nap microfiber towel.
  • Wait one hour and apply a second coat repeating the process (recommended, not required).
  • Allow coating system to cure for 2 hours before using the vehicle.

Superb Mirror Shine!

PRO 60 is a composite of inorganic polysilazane infused with millions of nanodiamond particles, creating the most extreme scratch-resistant coating available on the market.ย  Combined with PRO HYDRO, our long-lasting hydrophobic topcoat, this package creates an intense mirror-like gloss and irresistible slickness.