PRO HYDRO²

  • 10-Year Armor Protection
  • Diamond Hard Scratch Resistance
  • Chrome-like Mirror Gloss & Rich Color Depth
  • Extreme Hydrophobic Top Coat
Shipping calculated at checkout.
Size
APPLICATION INSTRUCTIONS

PRECAUTIONS

  • Apply in temperatures between 10-30°C, 50-90°F.
  • Apply in a closed, well ventilated, indoor area with air humidity not exceeding 70%
  • Cover and seal all windows
  • PRO 120 SPRAY requires IR Curing Lamps
  • Clean spray gun with PRO SOLVENT SPRAY (Spray Gun Cleaner) between products and immediately after applying PRO HYDRO SPRAY to avoid any permanent damage to the spray gun.
  • Must wear protective gloves and appropriate respirator.

WHAT YOU’LL NEED

  • 4 Microfiber Towels
  • Spray Gun & Diamond ProTech Adapter
  • Protective Gloves
  • Respirator Mask
  • Diamond Body Prep

IR CURING LAMP INSTRUCTIONS:

  • Temperature: 50-60°C / 120-140°F
  • Distance to bodywork: 60-70 cm / 24-28 inches.
  • Time: 15-20 minutes for each section.

INSTRUCTIONS

  • Wash, polish and treat areas to be coated with Diamond Body Prep.
  • Shake the bottle of PRO 120 A for 15 seconds. Connect the bottle to the Diamond ProTech adapter and then to the IWATA LPH-80 spray gun. Spray PRO 120 SPRAY A evenly over 3-4 sections of the car. Partially overlap each pass over the previous to insure full coverage.
  • Wait 10-15 mins and buff off excess with a low-nap microfiber towel.
  • Clean the spray gun with PRO SOLVENT SPRAY to prepare for PRO 120 SPRAY B.
  • Wait 1 hour to allow PRO 120 SPRAY A to bond before applying the next layer: PRO 120 SPRAY B
  • Shake the bottle of PRO 120 SPRAY B well for 15 seconds. Connect bottle to the Diamond ProTech adapter and then to the IWATA LPH-80 spray gun. Spray PRO 120 SPRAY B evenly over 1-2 sections of the car. Partially overlap each pass over the previous to insure full coverage.Wait 1-3 mins and buff off excess with a low-nap microfiber towel. Clean the spray gun with PRO SOLVENT SPRAY to prepare for PRO HYDRO SPRAY.
  • Diamond ProTech recommends using IR curing lamps to accelerate the curing process.
    If no IR curing lights are used, wait four hours to allow PRO 120 SPRAY B to dry before applying the next layer, PRO HYDRO SPRAY.
  • Shake the bottle of PRO HYDRO SPRAY well for 15 seconds and connect the bottle to the Diamond ProTech spray adapter and then to the IWATA LPH-80 spray gun. Proceed to spray PRO HYDRO SPRAY evenly over 3-4 sections of the car. Partially overlap each spray pass over the previous one to insure full coverage.
  • Wait 7-10 mins and buff off excess with a low-nap microfiber towel.
    Clean spray gun with PRO SOLVENT SPRAY when finished. Allow coating system to cure for 2 hours before using the vehicle.
PRO TIPS
  • To ensure the best & safest application process, make sure you have the following before applying: 4 microfiber towels, protective gloves, respirator, diamond body prep
  • If applying in high heat or high humidity, lower time between application and removal. Test over a small area to determine appropriate time to let the coating bond to the surface.
  • If the product “sweats” for an extended period and begins to dry on the surface or is difficult to remove, re-wet the area with more product and immediately buff off.

Introducing PRO HYDRO², the final touch for our PRO range of nanodiamond coatings. PRO HYDRO² safeguards your vehicle’s exterior against the elements, while simultaneously adding an aesthetic brilliance.

PRO HYDRO² conveniently serves as a sacrificial barrier between your thick nanodiamond coating and nature’s harshest elements. This hyper-slick and intensely hydrophobic top coat ensures water beads off effortlessly, preventing water spots and keeping your vehicle looking pristine, ultimately preserving its enhanced shine and gloss.

This coating’s unique 1-3 minute flash time allows for quick application, so you can spend less time installing the product, and more time letting it cure. Once cured, after just 2 hours, the vehicle is ready to be released back out into the wild, enabling installers to fit more vehicles into their coating schedule, leading to increased profitability.

With PRO HYDRO², annual re-application is a breeze, ensuring your vehicle maintains its showroom shine year after year.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)