Recommended: Diamond Body Prep for best application and full strength
$84.99
Application Instructions
PRECAUTIONS
Apply in temperatures between 10-30°C, 50-90°F.
Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
Wear protective gloves. Use fresh applicators & microfiber towels for the application of additional layers (do not use previously used towels).
WHAT YOU’LL NEED
1 Microfiber Towel
1 Applicator Pad
Protective Gloves
Diamond Body Prep
APPLICATION TIPS
Hand buff after application (do not use machine tool).
If applied in a hot climate (over 30°C/90°F), lower flashing time.
As Diamond Wrap's solvent evaporates, the PPF & vinyl surface will haze. This indicates that the WRAP's micropores have absorbed the coating and are ready for buffing to remove excess material.
Use an additional light source to control your work when polishing treated surfaces.
INSTRUCTIONS
Wash, dry, then treat the car body with Diamond Body Prep.
Shake the Diamond WRAP bottle well for 15 seconds.
Place 8-15 drops on an applicator and apply to 1-2 elements of the car in a crosshatch fashion.
Wait 1-3 mins for flashing, then polish off the excess with a microfiber towel. Hand buff for a beautiful protective finish. Your car is ready to drive away!
