One 50ML Bottle of PRO 120B Spray, which is enough to fully coat one vehicle.

• For use on all body panels, plastic trim, headlights, and chrome accents
• Do NOT use on windows 
• Use separate microfiber towels for wiping off Body Prep, PRO 120 Spray A, PRO 120 Spray B, and PRO Hydro² Spray
• Polishing is not required before application, but is strongly recommended
• If you experience a high spot while coating, re-apply PRO 120 Spray A, PRO 120 Spray B or PRO Hydro² Spray respectively to the affected surface & immediately wipe off.

1. Ensure all vehicle elements are wiped down with Diamond BODY PREP
2. For each coating: PRO 120 Spray A, PRO 120 Spray B and PRO Hydro2 Spray, shake each coating well for at least 15 seconds, respectively. Attach each Spray bottle to the spray gun adapter after clearing the gun each time with PRO Solvent Spray. 
3. Apply the respective coating to 1-2 elements of the car evenly. Apply more product as necessary.
4. For PRO 120 Spray A, wait 1-3 minutes, then wipe off the excess coating. Look for a hazing effect indicating the coating is ready to be wiped off. *
5. Wait 1 hour before applying PRO 120 Spray B
6. For PRO 120 Spray B, Wait 1-3 minutes, then wipe off the excess coating. Look for a hazing effect indicating the coating is ready to be wiped off. *
7. Wait 1 hour before applying PRO Hydro2 Spray
8. For PRO Hydro² Spray, Wait 3-5 minutes, then wipe off the excess coating. Look for lines and droplets indicating the coating is ready for wipe-off. *
9. * (Wipe off time may vary due to ambient temperature, humidity, and substrate type.)

For printable instructions, click here.