PRO 36

  • 3 Years of Hydrophobic Protection
  • Effortless, Single-Layer Application
  • Diamond Hard Scratch Resistance
  • Offers a Slick-Feeling, Intense Candy Apple Shine

Frais d'expédition calculés lors du passage à la caisse.


  • Apply in temperatures between 10-30°C, 50-90°F.
  • Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
  • Wear protective gloves.
  • Use fresh applicators & microfiber towels for application of additional layers (do not use previously used towels).


  • 2 Microfiber Towels
  • 1 Applicator Pad
  • Protective Gloves
  • Diamond Body Prep


  • If applying in high heat or humidity lower time between application and removal. Test over a small area to determine appropriate time to let the coating bond to the surface.
  • Apply PRO 36 to body, headlights, rubber, and metal trim.
  • As the coating bonds to the surface a haze will appear. This indicates coating is ready to remove. If product dries on the surface or is difficult to remove, re-wet the area with more product and immediately buff off.
  • If a second layer is desired, allow to cure for 1 hour before application.


  • Wash, polish and treat the areas to be coated with Diamond Body Prep.
  • Shake Diamond Pro 36 well for 15 seconds.
  • Place 15 drops on an applicator, and apply to 1-2 sections of the car in a crosshatch fashion.
  • Wait 5-10 mins watching for a haze to appear, then gently buff the treated areas and buff off excess with a low-nap microfiber towel.
  • Allow to cure for 1 hour before using the vehicle.


PRO 36 offers superlative results in every coating performance category yet applies quickly and easily. With proper preparation, PRO 36 will yield up to 3 years of hardened, hydrophobic protection while your car exhibits an intense candy apple shine.