PRO 60 MULTIPRODUCT BOX

  • 5-Year Armor Protection
  • Layerable, Hybrid Polymer Coating
  • Diamond Hard Scratch Resistance
  • Mirror-Like Gloss and Finish
  • Extreme Hydrophobic Top Coat

Los gastos de envío se calculan en la pantalla de pagos.
APPLICATION INSTRUCTIONS

PRECAUTIONS

  • Apply in temperatures between 10-30°C, 50-90°F.
  • Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
  • Wear protective gloves.
  • Use fresh applicators & microfiber towels for application of additional layers (do not use previously used towels).

WHAT YOU’LL NEED

  • 3 Microfiber Towels
  • 2 Applicators
  • Protective Gloves
  • Diamond Body Prep

APPLICATION TIPS

  • If applying in high heat or high humidity, lower time between application and removal. Test over a small area to determine appropriate time to let the coating bond to the surface.
  • Apply PRO 60 to body, headlights, rubber, and metal trim.
  • Apply PRO HYDRO to body, headlights, and metal trim, but not to rubber/plastic.
  • PRO 60/PRO HYDRO: As the coating bonds to the surface a haze will appear. This indicates the coating is ready to remove. If product dries on the surface or is difficult to remove, re-wet the area with more product and immediately buff off.

IR CURING LAMP INSTRUCTIONS:

  • Temperature: 50-60°C / 120-140°F
  • Distance to bodywork: 60-70 cm / 24-28 inches.
  • Time: 15-20 minutes for each section.

INSTRUCTIONS

  • Wash, polish and treat areas to be coated with Diamond Body Prep.
  • Shake PRO 60 well for 15 seconds. Place 15 drops on an applicator and apply to 1-2 sections of the car in a crosshatch fashion. Wait 1-3 mins watching for a haze to appear, then gently buff the treated areas and buff off excess with a low-nap microfiber towel.
  • Wait one hour and then apply a second coat repeating the process.
  • Wait one hour and apply a coat of PRO HYDRO that will give the coating system its amazing hydrophobicity. If curing with IR lamps, do so prior to applying PRO HYDRO.
  • Shake PRO HYDRO well for 15 seconds and then apply 15 drops on an applicator. Apply on 3-4 sections of the car in a crosshatch fashion.
  • Wait up to 7-10 mins and buff off excess with a low-nap microfiber towel.
  • Wait one hour and apply a second coat repeating the process (recommended, not required).
  • Allow coating system to cure for 2 hours before using the vehicle.

Nuestro sistema de recubrimiento de 5 años

PRO 60 y PRO HYDRO juntos brindan un acabado brillante como un espejo y una suavidad irresistible que mantiene un auto nuevo.

PRO 60 es un compuesto de polisilazano inorgánico infundido con millones de partículas de nanodiamantes, lo que crea el recubrimiento más resistente a los arañazos disponible en el mercado.

Combinado con PRO HYDRO , nuestro acabado hidrofóbico de larga duración, este paquete crea un brillo intenso como un espejo y una suavidad irresistible.


Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
H
Harrison Lerner
Fantastic Product

Pro 60 has been a hit with our customers since day 1, we highly recommend it to anyone looking for a durable, and super high gloss, 5 year coating for their vehicles.