DIAMOND WRAP

  • 18 Month Hydrophobic Protection
  • For Gloss, Satin, or Matte finishes
  • Effortless, Single-Layer Application
  • UV / Chemical Resistant
  • Silky Smooth Surface

Recommended: Diamond Body Prep for best application and full strength



$ 1,214.00
Shipping calculated at checkout.
Size
Application Instructions

PRECAUTIONS

  • Apply in temperatures between 10-30°C, 50-90°F.
  • Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
  • Wear protective gloves. Use fresh applicators & microfiber towels for the application of additional layers (do not use previously used towels).

WHAT YOU’LL NEED

  • 1 Microfiber Towel
  • 1 Applicator Pad
  • Protective Gloves
  • Diamond Body Prep

APPLICATION TIPS

  • Hand buff after application (do not use machine tool).
  • If applied in a hot climate (over 30°C/90°F), lower flashing time.
  • As Diamond Wrap's solvent evaporates, the PPF & vinyl surface will haze. This indicates that the WRAP's micropores have absorbed the coating and are ready for buffing to remove excess material.
  • Use an additional light source to control your work when polishing treated surfaces.

INSTRUCTIONS

  • Wash, dry, then treat the car body with Diamond Body Prep.
  • Shake the Diamond WRAP bottle well for 15 seconds.
  • Place 8-15 drops on an applicator and apply to 1-2 elements of the car in a crosshatch fashion.
  • Wait 1-3 mins for flashing, then polish off the excess with a microfiber towel. Hand buff for a beautiful protective finish. Your car is ready to drive away!

DIAMOND WRAP (PPF & VINYL) is a nanodiamond, single-layer coating specially formulated for flexible surfaces that expand and contract, such as self-healing paint protection or vinyl films.

DIAMOND WRAP (PPF & VINYL) will create a transparent, protective layer that will last up to 18 months.

It repels water and provides UV protection for your car's wrapped surfaces.

DIAMOND WRAP (PPF & VINYL) will NOT add gloss or alter any matte, satin, or flat film finish in any way.