PRO 120 MULTIPRODUCT BOX

Pro Installer Only

You must be a Pro Installer to view this product. Click below to learn more about our PRO series.

Learn More

Derived from aerospace technology, PRO 120 is the pinnacle of automotive coating protection. Featuring our patented nanodiamond technology, this 3-stage composite coating epitomizes the no-compromise mantra. Each layer binds together to create the thickest, longest lasting, most chemically resistant, and hydrophobic coating the world has ever seen. Featuring just a 2 hour cure window, this product can be applied and the vehicle can be released back to the customer same day. Gone are the days of holding vehicles for up to 48 hours due to obsolete ceramic technology, that's the nanodiamond difference.

Coat #1: One bottle of Pro 120A 30ml, enough for one vehicle

Coat #2: One bottle of Pro 120B 30ml, enough for one vehicle

Coat #3 - Top Coat: One bottle of Pro Hydro² 50ml, enough for one vehicle

Some additional tips before applying your coating

For use on all body panels, plastic trim, headlights, and chrome accents
Do NOT use on glass
Use separate microfiber towels for wiping off Body Prep, PRO 120A, PRO 120B, and PRO Hydro²
Polishing is not required before application, but is strongly recommended
If you experience a high spot while coating, re-apply PRO 120A, PRO 120B or PRO Hydro² respectively to the affected surface & immediately wipe off.

Ensure all vehicle elements are wiped down with Diamond BODY PREP
Shake PRO 120A, PRO120B and PRO Hydro² well for 15 seconds or longer, respectively. Place 15-20 drops to an applicator to prime each product.
Apply the respective coating to 1-2 elements of the car in a crosshatch fashion. Re-apply several more drops of product to the applicator as needed.
For PRO 120A, wait 1-3 minutes, then wipe off the excess coating. You may notice a hazing effect, this indicates the coating is ready to be wiped off. (Wipe off time may vary due to ambient temperature, humidity, and substrate type)
1 Hour after beginning PRO 120A, begin PRO 120B
For PRO 120B, wait 1-3 minutes, then wipe off the excess coating. You may notice a hazing effect, this indicates the coating is ready to be wiped off. (Wipe off time may vary due to ambient temperature, humidity, and substrate type)
1 Hour after beginning PRO 120B, begin Hydro²
For PRO Hydro², Wait 3-5 minutes, then wipe off the excess coating. You may notice defined lines followed by micro droplets of the coating, this indicates the coating is ready to be wiped off. (Wipe off time may vary due to ambient temperature, humidity, and substrate type)

For printable instructions, click here.

Innovators! Watch out for imitators!

This is the real deal in coating systems. Well worth the certificate and extra application time for the full 10 year system. Doing my third now in a weeks times. 10/10

Diamond Pro and 60 &120

I'm a Professional detailer I install & tried out both 60 &120 . They are real big game changer vehicles are shining like a diamond and the protection. It’s like no other coating in the market.