PRO 120 SPRAY MULTIPRODUCT BOX

  • 10-Year Armor Protection
  • Diamond Hard Scratch Resistance
  • Chrome-like Mirror Gloss & Rich Color Depth
  • Extreme Hydrophobic Top Coat

Shipping calculated at checkout.
APPLICATION INSTRUCTIONS

PRECAUTIONS

  • Apply in temperatures between 10-30°C, 50-90°F.
  • Apply in a closed, well ventilated, indoor area with air humidity not exceeding 70%
  • Cover and seal all windows
  • PRO 120 SPRAY requires IR Curing Lamps
  • Clean spray gun with PRO SOLVENT SPRAY (Spray Gun Cleaner) between products and immediately after applying PRO HYDRO SPRAY to avoid any permanent damage to the spray gun.
  • Must wear protective gloves and appropriate respirator.

WHAT YOU’LL NEED

  • 4 Microfiber Towels
  • Spray Gun & Diamond ProTech Adapter
  • Protective Gloves
  • Respirator Mask
  • Diamond Body Prep

APPLICATION TIPS

  • If applying in high heat or high humidity, lower time between application and removal. Test over a small area to determine appropriate time to let the coating bond to the surface.
  • Apply PRO 120 A to body, headlights, rubber, and metal trim.
  • Apply PRO 120 B to body, headlights, rubber, and metal trim.
  • Apply PRO HYDRO to body, headlights, and metal trim, but not to rubber/plastic.
  • PRO 120 A SPRAY / PRO 120 B SPRAY / PRO HYDRO SPRAY: As the coating bonds to the surface a haze will appear. This indicates the coating is ready to remove. If product dries on the surface or is difficult to remove, re-wet the area with more product and immediately buff off.

IR CURING LAMP INSTRUCTIONS:

  • Temperature: 50-60°C / 120-140°F
  • Distance to bodywork: 60-70 cm / 24-28 inches.
  • Time: 15-20 minutes for each section.

INSTRUCTIONS

  • Wash, polish and treat areas to be coated with Diamond Body Prep.
  • Shake the bottle of PRO 120 SPRAY A for 15 seconds. Connect the bottle to the Diamond ProTech adapter and then to the IWATA LPH-80 spray gun. Spray PRO 120 SPRAY A evenly over 3-4 sections of the car. Partially overlap each pass over the previous to insure full coverage.
  • Wait 10-15 mins and buff off excess with a low-nap microfiber towel.
  • Clean the spray gun with PRO SOLVENT SPRAY to prepare for PRO 120 SPRAY B.
  • Wait 1 hour to allow PRO 120 SPRAY A to bond before applying the next layer: PRO 120 SPRAY B
  • Shake the bottle of PRO 120 SPRAY B well for 15 seconds. Connect bottle to the Diamond ProTech adapter and then to the IWATA LPH-80 spray gun. Spray PRO 120 SPRAY B evenly over 1-2 sections of the car. Partially overlap each pass over the previous to insure full coverage.Wait 1-3 mins and buff off excess with a low-nap microfiber towel. Clean the spray gun with PRO SOLVENT SPRAY to prepare for PRO HYDRO SPRAY.
  • Diamond ProTech recommends using IR curing lamps to accelerate the curing process.
    If no IR curing lights are used, wait four hours to allow PRO 120 SPRAY B to dry before applying the next layer, PRO HYDRO SPRAY.
  • Shake the bottle of PRO HYDRO SPRAY well for 15 seconds and connect the bottle to the Diamond ProTech spray adapter and then to the IWATA LPH-80 spray gun. Proceed to spray PRO HYDRO SPRAY evenly over 3-4 sections of the car. Partially overlap each spray pass over the previous one to insure full coverage.
  • Wait 7-10 mins and buff off excess with a low-nap microfiber towel.
    Clean spray gun with PRO SOLVENT SPRAY when finished. Allow coating system to cure for 2 hours before using the vehicle.
SPRAY GUN SETTINGS & INSTRUCTIONS
  • We recommend that you use an IWATA LPH-80 spray gun with 0.8mm needle.
  • Clean spray gun with PRO SOLVENT SPRAY between layers and immediately after applying final layer of coating to avoid any permanent damage to the spray gun
  • Recommended spray gun settings:Air nipple – 3.5
  • Fluid nipple – 3.5-4.5 (depending on porousness of surface)
  • Pressure – 0.1-0.2 BAR

10 YEARS OF BEAUTIFUL PROTECTION

PRO 120 SPRAY is a multi-stage, top-of-the-line nanodiamond coating. Utilizing our most sophisticated pairing of enriched nanodiamond composites, PRO 120 SPRAY creates immense protection, scratch resistance, and rich color depth. Combined with PRO HYDRO SPRAY, our long-lasting hydrophobic topcoat, this package creates an intense mirror-like gloss and irresistible slickness. With proper preparation, PRO 120 SPRAY will yield up to 10 years of hardened, hydrophobic protection.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)