DIAMOND PRO 120 SPRAY MULTIPRODUCT BOX

Pro Installer Only

You must be a Pro Installer to view this product. Click below to learn more about our PRO series.

Learn More

Derived from aerospace technology, PRO 120 Spray is the pinnacle of automotive coating protection. Featuring our patented nanodiamond technology, this 3-stage composite coating system epitomizes the no-compromise mantra. Each layer binds together to create the thickest, longest lasting, most chemically resistant, and hydrophobic coating the world has ever seen. Featuring just a 2-hour cure window, this system can be applied and the vehicle can be released back to the customer the same day. Gone are the days of holding vehicles for up to 48 hours due to obsolete ceramic technology, that’s the nanodiamond difference. This sprayable formula is particularly beneficial to those working on extremely delicate paint finishes, reducing the number of times the vehicle must be physically touched.

First coat: One 50ML Bottle of PRO 120A, enough to fully coat one vehicle

Second coat: One 50ML Bottle of PRO 120B, enough to fully coat one vehicle

Top coat: One 50ML Bottle of Hydro², enough to fully coat one vehicle

Cleaning solution: One bottle of PRO Solvent Spray -- enough to clean your sprayer and spray adapter

Some additional tips before applying your coating

For use on all body panels, plastic trim, headlights, and chrome accents
Do NOT use on windows
Use separate microfiber towels for wiping off Body Prep, PRO 120 Spray A, PRO 120 Spray B, and PRO Hydro² Spray
Polishing is not required before application, but is strongly recommended
If you experience a high spot while coating, re-apply PRO 120 Spray A, PRO 120 Spray B or PRO Hydro² Spray respectively to the affected surface & immediately wipe off.

Ensure all vehicle elements are wiped down with Diamond BODY PREP
For each coating: PRO 120 Spray A, PRO 120 Spray B and PRO Hydro2 Spray, shake each coating well for at least 15 seconds, respectively. Attach each Spray bottle to the spray gun adapter after clearing the gun each time with PRO Solvent Spray.
Apply the respective coating to 1-2 elements of the car evenly. Apply more product as necessary.
For PRO 120 Spray A, wait 1-3 minutes, then wipe off the excess coating. Look for a hazing effect indicating the coating is ready to be wiped off. *
Wait 1 hour before applying PRO 120 Spray B
For PRO 120 Spray B, Wait 1-3 minutes, then wipe off the excess coating. Look for a hazing effect indicating the coating is ready to be wiped off. *
Wait 1 hour before applying PRO Hydro2 Spray
For PRO Hydro² Spray, Wait 3-5 minutes, then wipe off the excess coating. Look for lines and droplets indicating the coating is ready for wipe-off. *
* (Wipe off time may vary due to ambient temperature, humidity, and substrate type.)

For printable instructions, click here.