PRO WHEELS SPRAY MULTIPRODUCT BOX

Pro Installer Only

You must be a Pro Installer to view this product. Click below to learn more about our PRO series.

Learn More

PRO Wheels Spray is the greatest example of aerospace technology making its way into the automotive industry. This nanodiamond infused composite coating boasts a staggering heat resistance rating in excess of 1,832° Fahrenheit / 1,000° Celsius, a feat suitable for even the fastest Formula 1 race cars. The power of nanodiamonds also enables this coating to double as the most user-friendly, durable, and aesthetic coating ever made for wheels. Thanks to its speedy sprayable formula, PRO Wheels Spray is extraordinarily versatile, making it the ideal coating for intricate wheel designs, suspension components, and more areas that are otherwise unreachable by hand.

One 50ml Bottle of PRO Wheels Spray, enough for one vehicle.

One 50ml Bottle of PRO Solvent Spray, which is used to clean your sprayer.

PRO Spray adapter attachment sold separately here.

Some additional tips before applying your coating

For use on wheels, suspension, undercarriage, and engine components
Use separate microfiber towels for wiping off Diamond Body Prep & PRO Wheels Spray
If you experience a high spot while coating, re-apply Pro Wheels Spray to the affected surface & immediately wipe off
Polishing is not required before application, but is strongly recommended
Utilize the advantage of spray ability to coat hard to reach areas

FOR APPLICATION YOU NEED SPRAYGUN

We recommend that you use an IWATA LPH-80 spray gun with 0.8mm needle. Clean spray gun with SOLVENT SPRAY between layers and immediately after applying final layer of coating to avoid any permanent damage to the spray gun

Recommended spray gun settings:

Air nipple – 3.5
Fluid nipple – 3.5-4.5 (depending on porousness of surface)
Pressure – 0.1-0.2 BAR

Ensure all vehicle elements are wiped down with Diamond Body Prep
Shake PRO Wheels Spray well for at least 15 seconds. Attach PRO Wheels Spray bottle to the spray gun adaptor
Apply the coating evenly to the wheel. Apply more product as necessary
Wait 1-3 minutes, then wipe off the excess coating. Look for a hazing effect indicating the coating is ready to be wiped off. (Wipe off time may vary due to ambient temperature, humidity, and substrate type).

For printable instructions, click here.