PRO 60 MULTIPRODUCT BOX

Pro Installer Only

You must be a Pro Installer to view this product. Click below to learn more about our PRO series.

Learn More

Derived from aerospace technology, PRO 60 is the world's first multi-stage nanodiamond composite coating. Unlike ceramic coatings, PRO 60 is specifically designed to maximize profitability, without compromising film thickness. Featuring just a 2-hour cure window, this product can be applied and the vehicle can be released back to the customer the same day. Gone are the days of holding vehicles for up to 48 hours due to obsolete ceramic technology. Now your customer can rest assured they'll receive at least 5 years of extremely thick, abrasion resistant protection, with equally impressive hydrophobics thanks to it's innovative top layer.

One 30ml bottle of PRO 60, enough to coat one standard sized vehicle.

One bottle of Hydro², enough to coat one standard sized vehicle.

Some additional tips before applying your coating

For use on all body panels, plastic trim, headlights, and chrome accents
Do NOT use on glass
Use separate microfiber towels for wiping off Body Prep, PRO 60, and PRO Hydro²
Polishing is not required before application, but is strongly recommended
If you experience a high spot while coating, re-apply PRO 60 or PRO Hydro² respectively to the affected surface & immediately wipe off.

Ensure all vehicle elements are wiped down with Diamond BODY PREP
• Shake PRO 60 and PRO Hydro² well for 15 seconds or longer, respectively. Place 15-20 drops to an applicator to prime each product.
Apply the respective coating to 1-2 elements of the car in a crosshatch fashion. Re-apply several more drops of product to the applicator as needed.
For PRO 60, wait 1-3 minutes, then wipe off the excess coating. You may notice a hazing effect, this indicates the coating is ready to be wiped off. (Wipe off time may vary due to ambient temperature, humidity, and substrate type)
1 Hour after beginning PRO 60, begin Hydro²
For PRO Hydro², Wait 3-5 minutes, then wipe off the excess coating. You may notice defined lines followed by micro droplets of the coating, this indicates the coating is ready to be wiped off. (Wipe off time may vary due to ambient temperature, humidity, and substrate type)